HBE-3000A Electronic Brinell Hardness Tester For Ferrous And Non Ferrous Metals
HBE-3000A electronic Brinell hardness tester is suitable for measuring the Brinell hardness of ferrous and non-ferrous metals. This machine adopts closed-loop sensor loading and electronic control system, and has 10-level test force. This machine has the characteristics of high precision, high repeatability and stability, and easy operation.
Scope of Application
Brinell hardness uses a large test force and a large indentation diameter. It is suitable for hardness testing of metal materials with large grains, such as cast iron, non-ferrous metals and alloys, various annealed, quenched and tempered steels, especially for softer metals such as pure aluminum, lead, tin, etc.
Technical Parameters
| Parameter |
Value |
| Testing Force (N) |
612.9, 980, 1226, 1839, 2452, 4900, 7355, 9800, 14700, 29400 |
| Testing Force (Kg) |
62.5, 100, 125, 184.5, 250, 500, 750, 1000, 1500, 3000 |
| Testing Field |
8~650HBV |
| Hardness Range (HBW) |
≤125: ±3% (Max tolerance), ≤3.5 (Repetition)
125<HBW≤225: ±2.5% (Max tolerance), ≤3.0 (Repetition)
>225: ±2.0% (Max tolerance), ≤2.5 (Repetition)
|
| Max Height of Specimen |
220mm | 185mm |
| Max Width of Specimen |
130mm |
| Amplification of the Microscope |
20 times |
| Min Reading Grade of the Drum wheel of Microscope |
0.005mm | 0.625um |
| Power Voltage |
AC220V 50/60Hz (or AC110V) |
| Main Accessories |
Hard Alloyed Steel Ball Indenters: Diameter 2.5mm, 5mm, and 10mm each; One Microscope: 20X; Tables: Large, Small and V-Shaped each; Two Standard Hardness Blocks |
| Weight |
125kg |
| Package Dimensions |
750 × 210 × 550 (L×W×H) |
Frequently Asked Questions
1. What is Brinell hardness tester?
The Brinell hardness tester uses the oldest method of hardness testing commonly used today. It was invented in Sweden by Dr. Johan August Brinell in 1900. This test is often used to determine the hardness of castings and forgings whose grain structure is too course for accurate Rockwell or Vickers testing.
2. How do you perform a Brinell hardness test?
Brinell Hardness Test Procedure: In this test method, a predetermined force (F) is applied to a tungsten carbide ball of fixed diameter (D) and held for a predetermined time period, and then removed. The spherical indenter creates an impression (permanent deformation) on the test metal piece.
3. How does a hardness tester work?
A hardness test is typically performed by pressing a specifically dimensioned and loaded object (indenter) into the surface of the material you are testing. The hardness is determined by measuring the depth of indenter penetration or by measuring the size of the impression left by an indenter.
Machine Certificate
Business license and Fame Certificates Wall
Factory Environment
Company outdoor view
Reception
Sales and Technical Team
Exhibition
